179E 115 To 95 Isolated Trans

115 TO 95 ISOLATED TRANS

• Primary 115VAC, 50/60 Hz., Secondary 95VAC.
• Provides circuit isolation.
• Electrostatic shield between primary & secondary.
• World wide applications, 50 or 60 Hz. operation, step down (115VAC to 95 VAC).
• Designed mainly for Japanese equipment in North America.
• Perfect for operating "Classic" equipment that can not tolerate todays higher line voltages (ie..125 VAC input will produce a stress free 105 VAC output at full load PLUS isolation and shielding).
• Standard 3-wire, grounded plug (can also be used with adaptors for proper grounding).
• Input (primary) connected to a 5 foot long cord and standard North American plug (NEMA 5-15P)
• Output (secondary) connected to two standard - 3 wire grounded receptacles.
• Features include ventilated black steel case, rocker lighted on-off switch & fuse protected output.
• Indoor use only.
• Remember - These units do NOT convert line frequency

• This series has been discontinued and is available only as long as stock lasts. At this time there is no replacement however parts can be ordered as a custom. Contact Hammond customer service for a quote.