Rackmount Slide Rails & Fixed Rails - Dell PowerEdge R710 Server
Rackmount Solutions has rackmount fixed rail and slide rail mounting kits for the Dell PowerEdge R710 server. Our rackmount rails are available for a range of configurations and we also offer adaptors and conversion kits.
These high quality third party rackmount rails and mounting hardware suit round, threaded, and square hole mounting surfaces (check the specifications tables) and can be used with cable management systems.
Slide Rail Kit 2URAIL-R7-CMA |
|
| 
|
 |
View Details |
View Details |
- Mounting Depth Range: 18" to 31.5"
- Ball Bearing slide rails.
- Does not require the Dell Rail kit
- Works with any hole type (round, threaded, square)
- Complete Cable Management
|
- 4Post Racks: Mounts into any 19 inch rack
- 2Post Racks: Center or Flush Mount
- Does not require the Dell Rail kit
- Works with any hole type (round, threaded, square)
- No Cable Management
|
2URAIL-R7-CMA Instructions |
2UBRK-R7 Instructions |
Dell PowerEdge R710 Slide Rail Kit - Technical Information |
| Server Compatibility |
Dell PowerEdge R710 |
| Thumb Screws |
Threaded front flange mates with the Dell thumb screws (10-32 threads) |
Rack Compatibility - Server Racks |
| Rack Type |
4 Post 19" Rack (Server Racks, Equipment Racks, Cabinet Racks, and Open Frame Racks) |
| Rack Width |
Standard 19" racks. Meets EIA-310 requirements. Use Reducer Brackets for 23" and 24" racks. |
| Mounting Depth |
18" - 31.5" This is the range that the rail can be installed at. |
| Installation Depth |
TBD |
| Flange Thickness |
Any |
| Rack Flange Type |
Standard "L" Shaped Uprights or Non-Standard "C", "Z", and "?" Shapes |
| Square Hole Racks |
Compatible with industry standard 3/8" square hole racks. |
| Round Hole Racks |
Compatible with all standard round (non-threaded) holes. |
| Threaded Racks |
Compatible with all standard threads including 10-32, 12-24, and Metric M6. |
| |
Description |
Price |
|
2URAIL-R7-CMA
Third Party Rail Kit for Dell PowerEdge R710 with CMA |
$204.98 |
|
2URAIL-R7
Third Party Rail Kit for Dell PowerEdge R710 |
$174.99 |
|
2POST-2UKIT
2Post Conversion Kit for 1U & 2U Servers |
$139.99 |
|
4UKIT-003
2Post Flush Conversion for 1-7U Equipment
Works with standard 3" 2Post uprights
|
$199.99 |
Fixed Rail Kit 2UBRK-R7
2UBRK-R7 Instructions
- 4Post Racks: Mounts into any 19 inch rack
- 2Post Racks: Center or Flush Mount
- Does not require the Dell Rail kit
- Works with any hole type (round, threaded, square)
- No Cable Management
Dell PowerEdge R710 Fixed Rail Kit - Technical Information |
| Server Compatibility |
Dell PowerEdge R710 |
| Slam Latch |
The front mounting flange of the Rail Kit engages the Dell Slam Latch |
4 Post Rack Compatibility - Server Racks |
| Rack Type |
4 Post 19" Rack (Server Racks, Equipment Racks, Cabinet Racks, and Open Frame Racks) |
| Rack Width |
Standard 19" racks. Meets EIA-310 requirements. Use Reducer Brackets for 23" and 24" racks. |
| Rack Depth |
6.5" - 30" |
| Flange Thickness |
Any |
| Rack Flange Type |
Standard "L" Shaped Uprights or Non-Standard "C", "Z", and "?" Shapes |
| Square Hole Racks |
Compatible with industry standard 3/8" square hole racks. |
| Round Hole Racks |
Compatible with all standard round (non-threaded) holes. |
| Threaded Racks |
Compatible with all standard threads including 10-32, 12-24, and Metric M6. |
2 Post Rack Compatibility - Telco and Relay Racks |
| Rack Type |
19" Relay Racks, 2 Post Racks, Telco Racks. |
| Mount Type |
Center or Flush |
| Rack Width |
Standard 19" racks. Meets EIA-310 requirements. Use Reducer Brackets for 23" and 24" racks. |
| Rack Depth |
2" - 8" |
| Rack Threads |
Compatible with all standard threads including 10-32, 12-24. |
| |
Description |
Price |
|
2UBRK-R7
Third Party Rail Kit for Dell PowerEdge R710 |
$129.99 |
|
- Customer's who ordered this product also ordered
|
| |
|
