Home > Rackmount Rails > Rackmount Rails for Dell > Dell PowerEdge 2950, 2850 & 2650 (Slide and Fixed Rail)
Rackmount Slide Rails, Fixed Rails & Rack Mounting Adapters - Dell PowerEdge 2950, 2850 & 2650 ServerRackmount Solutions has rackmount fixed rail and slide rail mounting kits for the Dell PowerEdge 2950, 2850 & 2650 server. Our rackmount rails are available for a range of configurations and we also offer adaptors and conversion kits for the Dell 2950. These high quality third party rackmount rails and mounting hardware suit round, threaded, and square hole mounting surfaces (check the specifications tables) and can be used with cable management systems.
Slide Rail Kit 2URAIL-2X50
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Dell PowerEdge 2950, 2850, & 2650 Slide Rail Kit - Technical Information
Rack Compatibility - Server Racks
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2URAIL-2X50 Instructions
| Server Compatibility | Dell PowerEdge 2950 |
| Thumb Screws | Threaded front flange mates with the Dell thumb screws (10-32 threads) |
Rack Compatibility - Server Racks
| Rack Type | 4 Post 19" Rack with Square Hole mounting surface. |
| Rack Width | Standard 19" racks. Meets EIA-310 requirements. Use Reducer Brackets for 23" and 24" racks. |
| Mounting Depth | 25.25" - 31" This is the range that the rail can be installed at. |
| Installation Depth | 29.6" or 30.8" This is the overall depth of the installation depending on which Cable Management Brackets are used. If the CMA is not used the depth is 28.9" |
| Flange Thickness | Any |
| Rack Flange Type | Standard "L" Shaped Uprights or Non-Standard "C", "Z", and "?" Shapes |
| Square Hole Racks | Compatible with industry standard 3/8" square hole racks. |
| Round Hole Racks | This kit is not compatible with a Round Hole Rack. |
| Threaded Racks | This kit is not compatible with a Round Threaded Hole Rack. |
| Description | Price | |
| QUICKRAIL-2950 Sliding Quick Rail Kit for Dell PowerEdge 2950 |
$199.99 |
|
| 2POST-2UKIT-2950 2Post Conversion Kit for Dell PE2950, PE2850, PE2650 If Dell PE2850 or PE2650 Rail Kits are used then purchase 2POST-2UKIT |
$139.99 |
|
| 4UKIT-003 2Post Flush Conversion for 1-7U Equipment Works with standard 3" 2Post uprights |
$189.00 |
Fixed Rail Kit 2UBRK-2950
- 4Post Racks: Mounts into any 19 inch rack
- 2Post Racks: Center or Flush Mount
- Does not require the Dell Rail kit
- Works with any hole type (round, threaded, square)
- No Cable Management
Dell PowerEdge 2950 Fixed Rail Kit - Technical Information
| Server Compatibility | Dell PowerEdge 2950 |
| Thumb Screws | Threaded front flange mates with the Dell thumb screws (10-32 threads) |
4 Post Rack Compatibility - Server Racks
| Rack Type | 4 Post 19" Rack (Server Racks, Equipment Racks, Cabinet Racks, and Open Frame Racks) |
| Rack Width | Standard 19" racks. Meets EIA-310 requirements. Use Reducer Brackets for 23" and 24" racks. |
| Rack Depth | 6.5" - 30" |
| Flange Thickness | Any |
| Rack Flange Type | Standard "L" Shaped Uprights or Non-Standard "C", "Z", and "?" Shapes |
| Square Hole Racks | Compatible with industry standard 3/8" square hole racks. |
| Round Hole Racks | Compatible with all standard round (non-threaded) holes. |
| Threaded Racks | Compatible with all standard threads including 10-32, 12-24, and Metric M6. |
2 Post Rack Compatibility - Telco and Relay Racks
| Rack Type | 19" Relay Racks, 2 Post Racks, Telco Racks. |
| Mount Type | Center or Flush |
| Rack Width | Standard 19" racks. Meets EIA-310 requirements. Use Reducer Brackets for 23" and 24" racks. |
| Rack Depth | 2" - 8" |
| Rack Threads | Compatible with all standard threads including 10-32, 12-24. |
| Description | Price | |
| 2UBRK-2950 Third Party Rail Kit for Dell PowerEdge 2950 |
$134.99 |
Adapters 2URAIL-2950-EARS
- Replaces ends of PE2950 Rails
- Correct common obstruction problems
- Requires Dell Rail Kit
- Round and Square hole Server Racks
- Does not change mounting depth
Technical Information - Dell 2950 Rail Ears
| Server Compatibility | Dell PowerEdge 2950, 2970 |
4 Post Rack Compatibility
| Rack Manufacturers | Compatible with standard Square or Round Hole racks such as Dell, APC, HP, IBM, and RackSolutions. |
| Rack Type | 4 Post 19" Rack (Server Racks, Equipment Racks, Cabinet Racks, and Open Frame Racks) |
| Rack Width | Standard 19" racks. Meets EIA-310 requirements. |
| Installation Depth | Same as Dell RapidRails (27.5" to 29.75" inside from front rail to rear rail) |
| Flange Thickness | Any |
| Square Hole Racks | Compatible with the industry standard 3/8" square hole racks. |
| Round Hole Racks | Compatible with Round Hole Racks |
| Threaded Racks | Compatible with Threaded Hole Racks |
| Description | Price | |
| 2URAIL-2950-EARS Dell PE2950 Rail Ears |
$44.99 |
