Critical Power
Server Racks | Enclosures
Rackmount Accessories
Non-Rackmount Products
Miscellaneous
Home > A772444MSSP Server Rack Series > A772444MSSP-P10 Server Rack

A772444MSSP-P10 Server Rack

Server Cabinet Assembly consisting of:

(1) 772444 Patented Aluminum Extruded Welded frame with (4) additional stiffeners for additional strength, (2) top and (2) bottom, aluminum corner castings, Floor Style 12 GA CRS Base, vented front and rear with welded and cleaned corners.
External dimensions: 84.58"h x 28.33"w x 47.545"d
Internal usable: 77.09"h x 24.09"w x 44"d

(1) SP7744-SPLIT -- Externally Removable Side Panels Priced per SET=(4) pieces,(2) on the left and(2) on the right

(1) PFT2444-2535 -- Pagoda Fan Top panel with (2) 120V, 535 CFM fans, each have their own cord and plug, all corners are welded and cleaned, top panel is externally removable and is installed using closed cell foam to create a tight seal. 16 ga. CRS.

(1) GD7724X -- Glass door with lockable swing handle, key # EK333, RIGHT HAND HINGE and scuff plate for latch, 12 ga trim strip with studs to hold glass clamp strips, 3M 2 WAY tape on both sides of glass, extra clamp strips for added strength, aluminum extruded welded frame with 1/4" clear tempered glass and aluminum corner castings.

(1) SD7724 -- Solid Rear Door with lockable swing handle latch, key # EK333, RIGHT HAND Hinge, (1) Hat Section & document holder,16 GA.CRS

(1) VSB77 -- Vertical Support Bar (Stiffener Material) with (6) holes to mount to stiffeners and Xties, located on the right rear looking at the cabinet from the front

(8) FCM2X5D-2 -- Fiber Cable Management bracket with door on 2" side and radius bends on top and bottom for fiber cabling and (2) pcs. of Velcro, one on each radius. Mount to VSB77 equally spaced top to bottom. Made of 14 ga CRS.

(8) AB24-30 Adjustable Angle Brackets (STD) The bottom pair to be located so the bottom of the bracket leaves (2) COMPLETE 'U's open at the bottom (sets of 2)

(1) PSBP60-20-6(20A) -- 60" Power strip with (10) duplexes (20 outlets) 20 amp circuit breaker and 6' cord

(1) PSM7024-220-AF1 220V vertical power strip, 30A mounts in 40-44U cabinet.
- (24) IEC320 C13 receptacles wired in (3) banks of (8) each
- (6) 10A circuit breakers, (2) per bank
- 6' cord with L6-30 plug

(1) TH100 -- Thermostat to control one fan, comes with mounting bracket and Lexan cover (EC to wire fan)

(1) ADJ RAILKIT 7720-Adjustable Rail Kit Consisting of:

(4) "Z" Shaped Stiffening Brackets Approx. 50"Long that support the "L" Shaped Rail.

(28) 10-32 Pemnuts installed in "Z" Bracket

(28) 10-32 Flathead Screws

(28) 1/4-20 Spring Nuts(16 w/SHORT SPRING)

(16) 1/4-20 x 3/4" Screws

(12) 1/4-20 x 1/2" Screws

(24) 10-32 Spring Nuts in a plastic bag attached to rail-Used to secure vertical mounting rail to frame when 24"mounting is desired.

(3) HSB24-2--Horizontal Support Bar (double) made of 6061-T aluminum extrusion

(2) HSB04-2--Horizontal Support Bar (double) made of 6061-T aluminum extrusion

(1) VSR14-5R -- Pair of 5" Reducer Rails w/4

(1) M6-40 Hardware Pack

(1) CPL4248 - 42" x 48" Cushioned Pallet,bolt down brackets, bracket hardware and luan on sides

Frame and Base: Black
Sides and Doors: Black