Server Racks | Enclosures
Rackmount Accessories
Critical Power
Non-Rackmount Products
Home > Rackmount Rails > Rackmount Rails for Dell > Rackmount Slide Rails - Dell PowerEdge R610 Server

Rack Rails Rackmount Slide Rails - Dell PowerEdge R610 Server

Rackmount Solutions has rackmount fixed rail mounting kits for the Dell PowerEdge R610 server. Our rackmount slide rails are available for a range of configurations. These high quality third party rackmount slide rails and mounting hardware suit round, threaded, and square hole mounting surfaces (check the specifications tables).

Slide Rail Kit 1URAIL-R6-CMA

Rackmount Slide Rails for Dell PowerEdge R610 server

View Details

  • Mounting Depth Range: 18" to 31.5"
  • Ball Bearing slide rails.
  • Does not require the Dell Rail kit
  • Works with any hole type (round, threaded, square)
  • Complete Cable Management

download1URAIL-R6-CMA Instructions


Dell PowerEdge R670 Slide Rail Kit - Technical Information

Server Compatibility Dell PowerEdge R610
Thumb Screws Threaded front flange mates with the Dell thumb screws (10-32 threads)

Rack Compatibility - Server Racks

Rack Type 4 Post 19" Rack (Server Racks, Equipment Racks, Cabinet Racks, and Open Frame Racks)
Rack Width Standard 19" racks.  Meets EIA-310 requirements.  Use Reducer Brackets for 23" and 24" racks.
Mounting Depth 18" - 31.5" This is the range that the rail can be installed at. 
Installation Depth TBD
Flange Thickness Any
Rack Flange Type Standard "L" Shaped Uprights or Non-Standard "C", "Z", and "?" Shapes
Square Hole Racks Compatible with industry standard 3/8" square hole racks.
Round Hole Racks Compatible with all standard round (non-threaded) holes.
Threaded Racks Compatible with all standard threads including 10-32, 12-24, and Metric M6.

  Description Price
Call 1-800-352-6631 1URAIL-R6-CMA
Third Party Rail Kit for Dell PowerEdge R610 with CMA
Call 1-800-352-6631 1URAIL-R6
Third Party Rail Kit for Dell PowerEdge R610
Call 1-800-352-6631 2POST-2UKIT
2Post Conversion Kit for 1U & 2U Servers
Call 1-800-352-6631 4UKIT-003
2Post Flush Conversion for 1-7U Equipment
Works with standard 3" 2Post uprights